Stack Mounting Kits / 31143
Visão Geral
This hinged stack bracket is designed to fit a CR1000X datalogger, CR6 datalogger, or multiplexer on either the top or underneath. The hinge enables access to the equipment underneath without disconnecting any wires (assuming that the wires are long enough).
Note: An enhanced-conductivity version with a metallic appearance is available as assembly pn 39419.
imagens
31143
Produtos Relacionados
Especificações
| Dimensions | 27.168 x 10.16 x 13.317 cm (10.696 x 4.00 x 5.243 in.) |
Compatibilidade
The 31143 is not compatible with the ENC8/10.
The 31143 does not fit inside the ENC10/12. If the ENC10/12R is used, it must be oriented with the hinge toward the top or bottom.
listado em
Common Accessory for the following products:
- PWENC16/18 - Prewired Enclosure, 16 x 18 inches
- PWENC12/14 - Prewired Enclosure, 12 x 14 inches
- PWENC14/16 - Prewired Enclosure, 14 x 16 inches
- ENC16/18 - Weather-Resistant Enclosure, 16 x 18 inches
- ENC24/30 - Painted Steel Enclosure, 24 x 30 inches
- ENC10/12R - Raised Lid Enclosure, 10 x 12 inches
- ENC24/30S - Stainless-Steel Enclosure, 24 x 30 inches
- ENC12/14 - Weather-Resistant Enclosure, 12 x 14 inches
- ENC14/16 - Weather-Resistant Enclosure, 14 x 16 inches