The 31317 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector. This kit includes:
Note: For a pre-installed, bulkhead-mounted version of this same kit, see the 31315 Bulkhead Surge Protection Installed in Enclosure, Type N to SMA, 700 to 2700 MHz.
Coaxial Jumper |
|
Connector 1 | Type N plug |
Connector 2 | SMA plug |
Cable | RG174/U |
Length | 45.7 cm (18 in.) |
Surge |
|
Frequency | 700 to 2700 MHz |
Connectors | Type N jack |
Mounting | Bulkhead mount |
Operation |
|
Insertion Loss | < 0.1 dB |
Maximum Surge |
|
Temperature | -50° to +85°C |
Materials | Tri-plated brass body, PTFE dielectric, tri-metal center pins, SS 5/8-24 hex nut, SS 5/8 lock washer, silicon O-ring |
Standards | CE compliant, RoHS compliant, IEC 60529 IP67, Bellcore #TA-NWT-000487 |
Body Diameter | 3.0 cm (1.18 in.) |
Type N Connector Length | 2.41 cm (0.95 in.) |
Total Length | 9.17 cm (3.16 in.) |
Flange Mount |
|
Material | Aluminum with stainless-steel screws, nuts, and washers |
Dimensions | 3.81 x 2.54 x 2.85 cm (1.5 x 1.0 x 1.12 in.) |
Ground Wire |
|
Wire Type | 12 AWG stranded with PVC jacket |
Connector | 5/8 crimp ring lug, soldered |
Length | 61 cm (24 in.) |