CM230 Adjustable Inclination Mounting Kit

Visão Geral

The CM230 is an adjustable mount to point directional antennas or sensors at a specific target. The inclination can be adjusted to any angle from horizontal to vertical, supporting the use of upward-directed antennas or downward-directed infrared thermometers or snow-depth sensors.

Leia mais

imagens

Included hardware of the CM230
Included hardware of the CM230
Included hardware of the CM230
CM230 with poles (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to an antenna (sold separately)
CM230 attached to a rain gage (sold separately)

Descrição Técnica

The CM230 is typically attached to the mast of one of our tripods or towers, or in some applications to a user-supplied pipe. (See the Compatibility information.)

Especificações

Material 12 gage, 304 stainless steel
Wind Can withstand 241.4 kph (150 mph) wind with ice
Dimensions 7.62 x 9.53 x 8.89 cm (3.0 x 3.75 x 3.5 in.)
Weight 0.34 kg (0.75 lb)

Documentos Relacionados

Compatibilidade

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Mounting Equipment

Product Compatible Note
CM202
CM202SS
CM203
CM204
CM204SS
CM206

Additional Compatibility Information

The CM230 will accept antennas and sensors with a 1.0 in. to 1.5 in. outer diameter. The bracket can be attached to a mast or pipe with a 1.3 in. to 2.1 in. outer diameter. The declination of the antenna is fixed when the U-bolts attached to the tripod are tightened; the inclination of the antenna or sensor can then be adjusted with the other set of U-bolts and nuts.

Pipe

The CM230 is compatible with a 0.75 to 1.0 in. pipe size (1 to 1.5 in. OD) on the adjustable-angle side and a 0.75 to 1.5 in. pipe size (1 to 2 in. OD) on the fixed-angle side.


listado em