RETIRED ›
This product is no longer available. Some accessories, replacement parts, or services may still be available.
CS620 Water Content Sensor
Services Available
Repair No
Calibration No
Free Support No

Visão Geral

The CS620 is the sensor used in retired HydroSense system. The Hydrosense system combines a compact, handheld display and a sophisticated soil-water sensing probe in a portable package to provide quick and reliable soil-water content measurements. Each measurement takes less than one second and is obtained by inserting the probe rods into the soil and pressing a single button on the display unit. A choice of 12- or 20-cm probe rods makes HydroSense a versatile tool for monitoring and managing soil water in a wide range of conditions.

Leia mais

Benefícios e Características

  • Extra rods available for replacement or varied depth measurement

imagens

Descrição Técnica

The CS620 HydroSense Water Content Probe is a component of the HydroSense® system. A complete HydroSense System consists of this sensor, a CD620 display unit, and two probe rods. A choice of 12- or 20-cm long probe rods makes HydroSense a versatile tool for monitoring and managing soil water in a wide range of conditions.

To make a measurement, insert the CS620's probe rods into the soil and press a button on the CD620 display unit. The measurements takes less than one second. Values shown on the CD620 display indicate either percent volumetric water content or water deficit (as compared to a previously measured reference value).

Especificações

Accuracy ±3% water content
Resolution 0.25%
Range Dry to saturation
Output Square wave pulse train with ±2.5 Vdc amplitude
Spacing 32 mm (1.3 in.)
Rod Diameter 5 mm (0.2 in.)
Rod Length 12 cm (4.7 in.) or 20 cm (7.9 in.)
Dimensions 105 x 70 x 18 mm (4.1 x 2.8 x 0.7 in.)
Weight 390 g (14 oz) with 12 cm rods

Compatibilidade

The CS620 HydroSense Water Content Probe is a component of the HydroSense® system. A complete HydroSense System consists of this sensor, a CD620 display unit, and two probe rods.

The Hydrosense system is "stand-alone" and therefore data logger compatibility is not an issue.

listado em

Other Accessory for the following products: