FAQs Frequently Asked Questions about Our Products and Solutions

Faça uma Pergunta Faça uma Pergunta

All FAQs (1967 total: showing 1821-1840)

Can the CR510 manual be used to answer questions regarding a CR500?
How is the oxygen level in water controlled?
Which system would be most economical to monitor the water quality in fish ponds and prawn ponds?
Can the aquaculture systems be used for wastewater applications?
Can a SCADA system be put together using a CR10X, LoggerNet software, and RF401 radios?
If a DOS application requires bidirectional serial wireless communication with a nonintelligent data terminal, will a pair of RF401A radios work?
If an RF401 is used with a CR10X datalogger to communicate with the RF401 on the computer side, can four different data loggers with RF401 be used on the computer side, thus taking data from four different data loggers and plotting at the same time?
What is the typical range for the RF411?
Is there a shelf-life for the CS511-L Dissolved Oxygen Probe?
Can the CS511-L be used to measure dissolved oxygen in a soil medium?
Is a reference table sent with each CS511-L?
Can the CS511-L be completely immersed?
Is there a connection where the cable can come out of the CS511-L?
Using the BMP5 Direct SDK, how can data be queried from a data logger starting at time1 and continuing to time2?
What might cause a CR23X to lock up and display an "E08 Watchdog Reset" error?
Is it possible to use the BMP5 Direct SDK to connect to a data logger via a modem?
How can a data table on the data logger be deleted using the simplepb.dll library?
Can BMP5 Direct SDK software be used to interface/interact with a CR206X/CR211X datalogger via an RF416/RF411 connected to a PC serial port?
If a facility has ordered the RTDAQ software but wants to start using it right away, can a copy of the software be downloaded from the Campbell Scientific website?
Does CRBasic have to be used to program a data logger? Does a menu-driven program generator exist for the data logger?

Anterior Próximo