Toggle navigation
Produtos
Solutions
Suporte
Sobre Nós
Casa
Produtos
Solutions
Suporte
Sobre Nós
Cotação
Contato
Websites regionais
Websites regionais
Africa
Australia
Brasil
Canada
Centro Caribe
Deutschland
España
Europe
France
India
Japan
United States
ภาษาไทย
中国
Diretório país
Log In
FAQs
Frequently Asked Questions about Our Products and Solutions
Faça uma Pergunta
Faça uma Pergunta
Pesquisa
All FAQs
(1967 total: showing 661-680)
Do data loggers need their own batteries, or can they be powered directly through a BP24?
Is the battery mounting bracket for the BP24 battery sold separately?
Does a BP24 need a CH100 to work with an unregulated solar panel, or can the BP24 be connected directly to a regulated solar panel?
Is there a battery test kit to test BP24 battery packs out in the field to make sure they are good?
Is there an SDS (safety data sheet) for the BP24?
Can an SDM-CAN be used to interface with a scanner running on 500 kbps RS-422?
Are 32 bit numbers too large for an SDM-CAN to handle?
Can the SDM-CAN interface receive data from an ISOBUS (11783) CAN system?
How do the SC929 and SC32B compare?
Can an SC929 be used to connect a data logger CS I/O terminal with a sensor that has an RS-232 output?
What size barrel connector is used on the 15988?
What is the difference between a PS24 and a BP24? Is a BP24 with a CH100 equivalent to a PS24?
If a site is located in a fairly arid location, yet the RH reading from the CS215-L is 100%, what might cause this erroneous reading?
If the CS215-L is displaying a -100 (actually a -99.999) for temperature and RH, what is wrong?
What maintenance is recommended for the CS215-L?
Can a new filter cap be purchased for the CS215-L?
Is the sensor chip of the CS215-L field-replaceable?
Can a replacement chip for the CS215-L be purchased?
If the reported values for temperature and/or relative humidity from a CS215-L are not valid numbers, what should be done?
Can the CS215-L be calibrated?
Anterior
Próximo