This product is no longer available and has been replaced by: RF451. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Visão Geral
The FGR-115RC operated in the 902-928 MHz frequency range. Transmission range was up to 60 miles (please note that line-of-sight obstructions, RF interference, and antenna type affected transmission distance).
Leia maisimagens
Produtos Relacionados
Descrição Técnica
The FGR-115RC supported point-to-point and point-to-multipoint networks. It could serve as a field radio/modem connected to a data logger, as a stand-alone repeater not connected to a data logger, or as a base station radio/modem connected to a computer.
Freewave's FGR-115RC 1-Watt Spread Spectrum Radio was retired in July 2007.
Especificações
| Operating Frequency | 902 to 928 MHz |
| Type | Frequency Hopping Spread Spectrum (FHSS) Transceiver |
| Modulation | GFSK, 115.2 kbps or 153.6 kbps |
| Hopping Bands | 7, user selectable |
| Hopping Channels | 50 to 112, user selectable |
| Frequency Hopping Patterns | 15 per band, 105 total, user selectable |
| Occupied Bandwidth | 230 kHz |
| Transmitter Power Output | 100 mW to 1 W (+30 dBm) |
| Antenna Connector | Type N Female |
| Receiver Sensitivity |
|
| Operating Temperature Range | -40° to +75°C |
| Power | 6 to 30 Vdc |
| I/O Data Rate | 38,400 to 115,200 bps |
| RS-232 Connector | 9-pin “D” DCE |
| Dimensions | 16.5 x 7.4 x 5.7 cm (6.5 x 2.9 x 2.2 in.) |
| Weight | 441 g (15.5 oz) |
Average Current Drain |
|
| Sleep | 6 mA |
| Idle | 21 mA |
| Receiving | 86 mA |
| Transmitting | 500 mA |
Documentos Relacionados
Lâminas do produto
Compatibilidade
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Data Loggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR10X (retired) | ||
| CR200X (retired) | The internal radio of the CR200X-series dataloggers should not be used with the FGR-115RC. | |
| CR206X (retired) | The internal radio of the CR200X-series dataloggers should not be used with the FGR-115RC. | |
| CR211X (retired) | The internal radio of the CR200X-series dataloggers should not be used with the FGR-115RC. | |
| CR216X (retired) | The internal radio of the CR200X-series dataloggers should not be used with the FGR-115RC. | |
| CR23X (retired) | ||
| CR295X (retired) | The internal radio of the CR200X-series dataloggers should not be used with the FGR-115RC. | |
| CR3000 (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | Although the CR9000 is compatible, the FGR-115RC radio does not support is fastest communication rates, and is therefore not practical for most of its applications. | |
| CR9000X (retired) | Although the CR9000X is compatible, the FGR-115RC radio does not support is fastest communication rates, and is therefore not practical for most of its applications. |
Additional Compatibility Information
Communications
The FGR-115RC can be used in networks containing RF450 radios. Campbell Scientific does not recommend using it with our RF401-series or RF430-series radios.
Estudos de Caso
Moving clean, cold water through a trout-rearing facility is essential to its success. A live......Leia mais