This product is no longer available and has been replaced by: GPS16X-HVS. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Visão Geral
The GPS16-HVS sensor, manufactured by Garmin, consisted of a receiver and an integrated GPS antenna. It received signals from Global Positioning System (GPS) satellites, and then used the signals to calculate its position and velocity. That data, plus an extremely accurate real-time reading, could be transferred to the data logger for display or storage over time.
imagens
Especificações
| Operating Temperature Range | -30° to +80°C |
| Diameter | 8.6 cm (3.4 in.) |
| Height | 4.2 cm (1.7 in.) |
| Weight | 32 g (12 oz) |
Documentos Relacionados
Lâminas do produto
Manuais
Compatibilidade
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Data Loggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | The CR10 requires Instruction 15 be in its PROM. | |
| CR1000 (retired) | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR3000 (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | ||
| CR9000X (retired) |
Additional Compatibility Information
Data Logger Considerations
Data logger interface options
- A 17217 RJ45 Interface Cable to connect the sensor to a data logger control port. This option is compatible with our CR10(X), CR800, CR850, CR1000, CR3000, and CR23X dataloggers.
- A 17218 Adapter and 18663 Null Modem Cable to connect the sensor to the data logger RS-232 port. This option is compatible with our CR23X, CR800, CR850, CR1000, and CR3000 dataloggers.
- A 17218 Adapter to measure the sensor via an SDM-SIO4 Serial Input/Output Module. This option is compatible with our CR800, CR850, CR10X, CR1000, CR3000, CR23X, CR5000, and CR9000(X) dataloggers; it is the only option that is compatible with the CR5000 and CR9000(X) dataloggers.
GPS instruction
Our CR800, CR850, CR1000, and CR3000 dataloggers typically use the GPS instruction to read the GPS sensor. For the GPS instruction to "set the time" or "use the pulse from the GPS sensor," some data loggers need an updated clock chip. The clock chip is factory replaced (requires an RMA). Data loggers with the following serial numbers need an updated chip:
| Data Logger | Serial Number |
| CR1000M | < 20409 |
| CR800, CR850 | < 792 |
| CR3000 | < 3168 |