17648 USB Cable, Type A Pin (Male) to Type B Pin (Male), 6 ft

Visão Geral

The 17648 is a USB cable for attaching our products to a USB port on a PC. It has a type A pin (male) connector for connecting to the PC's USB port and a type B connector for connecting to the Campbell Scientific device. Refer to the Compatibility information for a list of Campbell Scientific devices that use this cable.

imagens

Especificações

PC Connector USB type A
Device Connector USB type B
Cable Length 1.83 m (6 ft)
Weight 45.4 g (0.1 lb)

Compatibilidade

This cable is used with the following devices:

  • SC-USB Interface:  This USB cable began shipping with the SC-USB in December 2009; prior to that the SC-USB was fitted with a USB cable as part of its integrated package.
  • CWB100-Series Wireless Sensor Base Stations: This cable can be used to connect the base station to a PC.
  • COM320 Voice Modem:  This cable connects the COM320 to a PC for changing the COM320'S settings or OS.
  • RF430-series Spread Spectrum Radios: This cable connects the radio to the base station PC.
  • TX320 GOES Transmitter: This cable can be used to connect the transmitter to a PC for configuring the transmitter. 


Drivers are required to use this cable. The drivers are shipped with the devices (except the COM320) and can be downloaded from our website.


Downloads

COM320 USB Driver v.1.0 (1 KB) 11-06-2009

Windows USB driver for the COM320 are distributed with the Device Configuration Utililty. In the Device Configuration Utility, click on the link "install the device driver for the COM320" in the main body of text for the COM320.

Note: Device Configuration Utility 2.08 or newer is required to install drives and configure the COM320.

 

RF430 USB Drivers v.2.08.28 (1.64 MB) 05-03-2013

RF430 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows Vista and Windows XP.

Note: Drivers should be loaded before plugging the RF430 into the computer.


SC-USB Drivers v.2.10.00 (6.37 MB) 21-05-2014

The SC-USB's Software drivers for use with Windows Operating Systems. Visualize o Histórico de Revisões

CWB100 USB Driver v.1.0 (1.45 MB) 18-10-2010

Windows USB drivers for the CWB100 are installed via the Device Configuration Utililty. In the Device Configuration Utility, click on the link "install the device driver for the CWB100" in the main body of text for the CWB100.

Note: Driver must be installed before connecting the CWB100 to your computer.