19017 Enclosure Tower Mounting Kit

Visão Geral

The 19017 is used to mount a Campbell Scientific enclosure to a UT6, UT10, UT20, UT30, or UTHD tower. The 19017 is option "TM" when ordered with the enclosure.

Leia mais

imagens

Descrição Técnica

The 19017 consists of a three-piece bracket attached to the top of the enclosure and an identical three-piece bracket attached to the bottom of the enclosure. Four U-bolts fasten the brackets to the tower legs.

Please note that enclosures with this bracket are shipped configured for the UT6/UT10 tower. UT20 and UT30 customers will need to:

  1. Remove the bolts attaching the bracket to the enclosure
  2. Slide out the flange sections so that the distance between the center of each flange is 17"
  3. Reattach the bracket to the enclosure using the original bolts.

Compatibilidade

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Mounting Equipment

Product Compatible Note
10760
6139
UT10
UT6

Especificações

Bracket Material Stainless steel
U-bolt Size 3.8 cm (1.5 in.)
Maximum Outer Diameter of Vertical Pipes 3.8 cm (1.5 in.)
Maximum Distance between Centers of Vertical Pipes 49.5 cm (19.5 in.)
Dimensions 33.02 x 8.89 x 2.54 cm (13.0 x 3.5 x 1.0 in.)
Weight 657.71 g (1.45 lb)