RAD06 6-Plate Solar Radiation Shield
A Better, Naturally Aspirated, Multi-Plate Radiation Shield
Shades and protects sensor
clima estudos de caso água estudos de caso energia estudos de caso gas flux and turbulence estudos de caso infraestrutura estudos de caso terra estudos de caso

Visão Geral

The RAD06 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.

Note: In the image, the RAD06 is mounted to a crossarm with a thermistor.

Leia mais

Benefícios e Características

  • Improved sensor protection from driving rain, snow, and insect intrusion
  • Lower self-heating
  • Mounts directly to Campbell Scientific tripods and towers
  • Used with HMP60, CS215, 107, 108, 109, HMP50, or CS500 probes

imagens

Descrição Técnica

The RAD06 houses one 107, 108, 109, CS215, or HMP60 probe. The probe fits in the bottom of the shield and is held in place with a foam-lined gland.

The RAD06 includes a 2 in. U-bolt with a plastic V-block. The U-bolt is placed in the holes on the side of the bracket for attachment to a mast or vertical pole. The U-bolt is placed in the holes on the bottom of the bracket for attachment to a crossarm.

Especificações

Construction UV-stabilized white thermoplastic plates, aluminum mounting bracket, white powder-coated stainless-steel U-bolt clamp
Plate Diameter 12.3 cm (4.84 in.)
Height 14.2 cm (5.59 in.)
Weight 870 g (1.92 lb)

Compatibilidade

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Sensors

Product Compatible Note
107
108
109
43347-L
CS215-L (retired)
CS500-L (retired)
HC2S3-L (retired)
HMP155A-L
HMP35A (retired)
HMP35C-L (retired)
HMP45C-L (retired)
HMP50-L (retired)
HMP60-L

Additional Compatibility Information

The RAD06 attaches to a crossarm, mast, or user-supplied pipe with a 1.0 to 2.1 in. OD.