RETIRED ›
This product is no longer available. Some accessories, replacement parts, or services may still be available.
RF302 UHF Radio Transceiver
Services Available
Repair No
Calibration No
Free Support No

Visão Geral

NOTE: The RF300-series transceivers are still available for customers who already own RF300-series transceivers, but for newer radio customers, the RF320-series is usually a better choice.

The RF302 is a DRL UHF radio transceiver for customers who will have an FCC-assigned frequency in the range of 450 to 470 MHz. It's programmed to an exact user-specified frequency by Campbell Scientific using special software.

Leia mais

imagens

Produtos Relacionados

Descrição Técnica

NOTE: The RF300-series transceivers are still available for customers who already own RF300-series transceivers, but for newer radio customers, the RF310-series is usually a better choice.

The RF302 is a Dataradio 3412-510 UHF radio transceiver for customers who have an FCC-assigned frequency in the range of 450 to 470 MHz. The transceiver is programmed to an exact user-specified frequency by Campbell Scientific using special software.

Besides the radio, each field station and repeater station must also have an RF500M Radio Modem or RF95(A) Radio Modem; base stations need an RF500M radio modem, RF500B base station, or RF232(A) base station.

Especificações

Power Output 5 W at 13.3 V (nominal)
Frequency Control Synthesized
Channel Spacing 12.5/25 kHz
Operation Voltage
  • 13.3 Vdc (nominal)
  • 10 to 16 Vdc (operational)
Current Drain
  • 50 mA (quiescent)
  • ~ 1.5 A (while transmitting)
Operating Temperature -30° to +60°C
Humidity 95% maximum RH at 40°C (non-condensing)
Dimensions 11.7 x 8.4 x 5.6 cm (4.6 x 3.3 x 2.2 in.)

Compatibilidade

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Data Loggers

Product Compatible Note
21X (retired)
CR10 (retired)
CR1000 (retired)
CR10X (retired)
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR295X (retired)
CR3000 (retired)
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR800 (retired)
CR850 (retired)
CR9000 (retired)
CR9000X (retired)

Additional Compatibility Information

Radios, Radio Modems, and Radio Base Stations

The RF302 is compatible with the RF500M radio modems, RF500B base stations, RF95(A) radio modems, RF232(A) base stations, E.F. Johnson-series radios, and P50-series radios. The RF302 is NOT compatible with the RF310M radio modem, RF310B Base Station, and RF310-series radios.

Perguntas Frequentes Relacionadas

Number of FAQs related to RF302: 1

  1. It is possible to connect two antennas to a single radio via a properly specified (operating frequency and power handling capability) two-way, 50 ohm RF power divider. One example of this type of power divider is offered by Pasternack. Note that using a device like this will induce additional losses into the system (3 to 4 dB, typically).