SC110 Two Cables, RS-232 to Data Logger Control Port

Visão Geral

The SC110 consists of two cables to connect a data logger with RS-232 DCE and DTE devices. One end of each cable provides stripped, tinned leads for attachment to the control ports on a CR800, CR850, CR1000, CR3000, CR6, or CR1000X/Xe datalogger. On the other end, one of the cables is fitted with a 9-pin pin (male) connector, and the other cable is fitted with a 9-pin socket (female) connector.

Leia mais

Benefícios e Características

  • Connects RS-232 ports on devices to stripped wire ends that can connect to data loggers

imagens

Descrição Técnica

The SC110 provides (1) 17855 DTE Cable and (1) 17856 DCE Cable. On one end, both cables have stripped and tinned leads that connect to the COM ports of a CR800, CR850, CR1000, CR3000, CR6, or CR1000X. On the other end, the 17855 DTE cable has a 9-pin pin (male) connector, and the 17856 DCE cable has a 9-pin socket (female) connector. By having two cables, connection to either an RS-232 DCE or DTE device is supported—depending on the cable used.

Stripped-Tinned Leads:

Lead Color Desc. 17855
Connection		 17856
Connection
White pin 2 Rx on logger Tx on logger
Brown pin 3 Tx on logger Rx on logger
Yellow pin 5 Gnd on logger Gnd on logger
Clear shield Gnd on logger Gnd on logger

Especificações

Length 0.6 m (2 ft) for each cable
Weight 0.1 kg (0.3 lb)

Compatibilidade

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Data Loggers

Product Compatible Note
CR1000 (retired)
CR1000X
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR295X (retired)
CR3000 (retired)
CR5000 (retired)
CR6
CR800 (retired)
CR850 (retired)
CR9000X (retired)

Perguntas Frequentes Relacionadas

Number of FAQs related to SC110: 1

  1. What is needed to connect a modem to a data logger?

    Most third-party modems require a null modem cable, SC105, SC110 cable, or SC932A to interface with a data logger.  Many modems manufactured by Campbell Scientific can connect directly to a data logger’s CS I/O port using an SC12 or serial cable.

Visite a FAQ Biblioteca