microSD Cards / 27159
RETIRED ›
This product is no longer available and has been replaced by: 38476. Some accessories, replacement parts, or services may still be available.
27159 16 GB microSD Flash SLC Memory Card
Services Available
Repair No
Calibration No
Free Support Yes

Visão Geral

The 27159 is a 16 GB microSD flash-memory card. This card is designed for use in harsh conditions often presented by environmental and industrial applications. The card uses single-level cell (SLC) memory, which aids in its ability to operate over wide temperature ranges, consume less power, and provide a reliable data-storage medium through more read-write cycles.

Leia mais

Benefícios e Características

  • High-endurance and high-performance SLC NAND flash
  • Ruggedized for industrial environments
  • Advanced firmware features for data integrity in industrial environments
  • Advanced flash management for device reliability

imagens

Descrição Técnica

The 27159 is a 16 GB SLC microSD card designed for the rugged conditions of industrial and other demanding applications—including solar radiation applications. The card has a water and dust ingress protection rating of IP57 (IEC 60529). The 27159 has been subjected to testing for ESD, shock and vibration, salt atmosphere endurance, and bend and torque.

The advanced firmware of the 27159 card ensures the integrity of stored data in industrial environments. Two of these features are AutoRefresh and Autoscan.

The advanced flash management system of the 27159 ensures device reliability through advanced wear-leveling algorithms and bad-block management.

For more information about SLC microSD cards and their benefits, review the FAQ.

Especificações

Card Type microSD, industrial
Storage Capacity 16 GB
Memory Type single-level cell (SLC)
Operating Temperature Range -40° to +85°C
Water & Dust Ingress Protection Rating IP57 (IEC 60529)
Weight 4.54 g (0.01 lb)

Compatibilidade

Our CR1000X and CR6 dataloggers accept microSD cards.

Perguntas Frequentes Relacionadas

Number of FAQs related to 27159: 1

  1. What is the difference between the microSD cards that Campbell Scientific sells and the cards that are commonly used in the consumer electronics at home?

    Campbell Scientific sells, and embeds in their products, microSD cards that have single-level cell (SLC) memory. In contrast, many electronics retailers sell microSD cards that have multi-level cell (MLC) memory. The difference between these two types of memory is significant.

    • The SLC microSD cards from Campbell Scientific are better suited for industrial and environmental applications where wide operating temperatures, low power consumption, and longevity are very important. Most SLC memory cards are designed with industrial applications in mind and, therefore, often have additional perks such as enhanced protection from ESD (electrostatic discharge) and mechanical damage.
    • The MLC microSD cards commonly available at electronics retailers are less expensive, but they are generally not well suited for the majority of applications in which Campbell Scientific data acquisition products are used.
Visite a FAQ Biblioteca