The Campbell Scientific Blog: Your source for useful how-to...

How to Create Custom Sensors in Short Cut

Autor: Jason Ritter | Ultima atualização: 02/27/2019 | Comentários: 4

Have you ever wanted Short Cut to support more sensors? Although Short Cut supports many sensors, you may have found that the sensor you want to measure is not on the list. What do you do then? How do you add that sensor to your... Leia mais

How to Select the Correct Pulse Type for Your Measurements

Autor: Jacob Davis | Ultima atualização: 04/21/2016 | Comentários: 0

Have you ever had a sensor work on a P (pulse) data logger terminal, but not on a C (control) terminal? Is the list of choices for the PConfig parameter in the PulseCount() instruction daunting? Campbell Scientific data loggers offer several options for measuring pulse... Leia mais

4 Tips to Successfully Run an MD485 Network with Extreme Cable Lengths

Autor: Andrew Sandford | Ultima atualização: 12/23/2015 | Comentários: 0

Do you have a network of devices, connected using MD485 interfaces, so spread out that extremely long cables are required? Are you worried that the distances, and resultant cable lengths, may be causing communication problems? In this brief article, we’ll look at four tips that... Leia mais

Area / Application

Product Category

Activity

Corporate / News

The Campbell Scientific Blog Your source for useful how-to information and helpful expert advice

Tópicos de blog

Pesquisar o Blog

Inscrever-se para o Blog