Flexible for use in the lab and out in the field
Visão Geral
The Granite™9 and Granite™10 are the most computationally powerful data-acquisition devices from Campbell Scientific. As an all-digital measurement and control DAQ, the Granite 9 is designed as the core of the data-acquisition network, integrating with all GRANITE™ measurement modules, including the Volt 108, Volt 116, Temp 120, VWire 305, and CH400.
Leia maisBenefícios e Características
- Traditional network connections via Ethernet port
- EPI port switch for high-speed connection to all GRANITE measurement modules
- Onboard storage of streaming data with 2 GB of DDR3 SDRAM and a 64 GB solid-state hard drive (SSD)
- Built-in GPS for network synchronization
imagens
3D / CAD Files:
Descrição Técnica
The Granite 9 enables you to perform the following:
- Standard measurement functions
- Advanced math and processing functions
- Control functions
A complete GRANITE system installation may include the following components:
- Granite™Chassis
- Granite 9
- CH400
- Power source (mains or solar)
- Software
Especificações
| -NOTE- | Additional specifications are listed in the GRANITE 9 Specifications. |
| Power Requirements | 9.6 to 32 Vdc (voltage input) |
| Real-Time Clock Accuracy | ±3 min. per year |
| Operating Temperature Range |
|
| Case Material | Stainless steel 304 and aluminum 6061 |
| Communications Ports |
|
| Data Storage Ports |
|
| Digital I/O | 8 terminals (C1 to C8) configurable for digital input and output. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions. |
| Internet Protocols | Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, Telnet, HTTP(S), SFTP, FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, CS I/O IP |
| Communication Protocols | CPI, EPI PakBus, PakBus Encryption, SDM, SDI-12, Modbus RTU / ASCII / TCP, DNP3, custom user definable over serial, UDP, NTCIP, NMEA 0183, I2C, SPI |
| Warranty |
|
| Battery-backed SRAM for CPU Usage & Final Storage | 4 MB |
| Data Storage |
|
| Active Current Drain, Average |
|
| Static Vibrating-Wire Measurements | Not supported |
| Dimensions |
21.4 x 12.0 x 5.0 cm (8.4 x 4.7 x 2.0 in.) Additional clearance required for cables and leads. |
| Weight | 1.0 kg (2.2 lb) |
Documentos Relacionados
Lâminas do produto
Manuais
Trabalhos técnicos
Conformidade
Compatibilidade
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Measurement and Control
| Product | Compatible | Note |
|---|---|---|
| CDM-A108 (retired) | ||
| CDM-A116 (retired) | ||
| CDM-VW300 (retired) | ||
| CDM-VW305 (retired) | ||
| Granite Temp 120 | Requires OS version 1 or greater. | |
| Granite Volt 108 | ||
| Granite Volt 116 | ||
| Granite VWire 305 |
Miscellaneous
| Product | Compatible | Note |
|---|---|---|
| Granite Chassis |
Videos & Tutoriais
Downloads
Granite 9 OS v.2.01 (6.33 MB) 04-05-2021
This OS should only be updated via direct connection with the Granite 9.
This download is for the Granite 9 datalogger. Execution of this download places the Operating System file(.obj) on your computer. It also updates the CRBasic Editor compiler and support files.
Note/Warning: Campbell Scientific always recommends updating operating systems on site if possible. When remote updates are required, it is recommended that you implement the necessary precautions to handle unexpected OS upload complications. All datalogger settings should be retained when updated remotely. If you choose to roll back to a previous operating system, the datalogger settings will be reset to default.
Watch the Video Tutorial: Sending an OS to a Local Datalogger.
VWire 305 program example v.1 (2 KB) 16-01-2020
Program to read 20 Hz dynamic data from two VWire 305 analyzers measuring eight channels each.
Custom Menu Example Program for Connections Video v.1 (1 KB) 26-03-2024
This program demonstrates creating a custom menu for data logger displays and corresponds to the Campbell Connections video: Creating Custom Menus in CRBasic for a Data Logger Display.
Perguntas Frequentes Relacionadas
Number of FAQs related to Granite 9: 1
-
If a CPI-enabled device is running and there are skipped scans in the data logger, what can be done?
The default CPI bus speed setting is 250 kB/s. The speed is adjustable in your CRBasic data logger program. Use the CPISpeed() instruction in your CRBasic program to adjust the CPI bus bandwidth to meet the following maximum combined (total) Ethernet cable lengths:
- 1000 kB/s for maximum combined Ethernet cable lengths of 15.2 m (50.0 ft)
- 500 kB/s for maximum combined Ethernet cable lengths of 61.0 m (200.0 ft)
- 250 kB/s for maximum combined Ethernet cable lengths of 152.4 m (500.0 ft)
Estudos de Caso
GKM Consultants was contracted by a nationally leading engineering firm to develop, commission, and install......Leia mais