RETIRED ›
This product is no longer available and has been replaced by: RF321,RF322. Some accessories, replacement parts, or services may still be available.
RF313 UHF Radio Transceiver
Services Available
Repair No
Calibration No
Free Support No

Visão Geral

The RF313 is a rugged, narrowband UHF radio transceiver for customers with an FCC-assigned frequency in the range of 400 to 440 MHz. It is well-suited for Campbell Scientific RF networks. An FCC license is required.

Leia mais

Benefícios e Características

  • Rugged, low-cost narrow-band transceiver
  • Meets NTIA narrowband and FCC refarming requirements for transmission
  • Supports up to 16 channels
  • Transmits up to 25 miles line of sight
  • Compatible with most of our current and retired dataloggers
  • Supports up to 254 dataloggers on a single frequency
  • Each station can act as a repeater to extend the transmission distance attainable by the network

imagens

Produtos Relacionados

rf500m radio modem
RF500M Radio Modem

Descrição Técnica

The RF313 is programmed by Campbell Scientific to the frequency that was assigned by the Federal Communications Commission (FCC). This frequency must be specified at time of order so that it can be programmed into the radios.

A user-supplied antenna that matches the FCC-assigned radio frequency is required for each radio. Typically, the COAXNM-L coaxial cable is used to connect the antenna with the radio. One end of the COAXNM-L includes a male BNC connector that mates with the radio's BNC connector. The other end of the COAXNM-L includes a Type N Male connector that mates with the antenna's connector; the majority of VHF/UHF antennas terminate in a Type N Female connector.

Besides the radio, each field station and repeater station must also have an RF500M Radio Modem or RF310M Radio Modem; base stations need an RF500M modem, RF500B Base Station, or RF310B Base Station. The RF System brochure provides a complete list of equipment used in our field stations, repeater stations, and base stations.

Especificações

Frequency Error ±3.0 ppm
Frequency Deviation Peak ±5.0 (12.5 kHz channel spacing)
Adjacent Channel Power 60 dB @ nominal conditions (12.5 kHz channel spacing)
Operating Temperature -30° to +60°C
Dimensions
  • 11.7 x 6.2 x 3.0 cm (4.6 x 2.4 x 1.2 in.) without mounts and connectors
  • 13.5 x 7.6 x 3.6 cm (5.3 x 3.0 x 1.4 in.) with mounts and connectors
Weight 218 g (7.7 oz)

RF Power Output (nominal)
High 5 W
Low 1 W

Current Drain
Standby < 65 mA (muted)
Transmit
  • < 2000 mA (5 W RF power)
  • < 1000 mA (1 W RF power)
Receiver < 80 mA

Compatibilidade

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Data Loggers

Product Compatible Note
21X (retired)
CR10 (retired)
CR1000 (retired)
CR10X (retired)
CR200X (retired) The CR200X-series dataloggers are only compatible if the RF500M radio modem is used.
CR206X (retired) The CR200X-series dataloggers are only compatible if the RF500M radio modem is used.
CR211X (retired) The CR200X-series dataloggers are only compatible if the RF500M radio modem is used.
CR216X (retired) The CR200X-series dataloggers are only compatible if the RF500M radio modem is used.
CR23X (retired)
CR295X (retired) The CR200X-series dataloggers are only compatible if the RF500M radio modem is used.
CR3000 (retired)
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR800 (retired)
CR850 (retired)
CR9000 (retired)
CR9000X (retired)

Communication Devices

Product Compatible Note
RF232 (retired)
RF232A (retired)
RF232T (retired)
RF310B (retired)
RF310M (retired)
RF315M (retired)
RF500B (retired)
RF500M
RF95 (retired)
RF95A (retired)
RF95T (retired)

Additional Compatibility Information

Radios

The RF313 does not work with other radio models.

listado em

Other Accessory for the following products: