This product is no longer available and has been replaced by: RF500M. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Visão Geral
Used with our RF300-series radios, the RF95A provides an RF communication interface between the data logger and an RF300-series radio.
Leia maisimagens
Produtos Relacionados
Descrição Técnica
Note: The RF95A has been replaced by the RF500M modem. The RF95A remains available for customers with application-specific custom PROMS.
The RF95A is used with our RF300-series radios. It provides an RF communication interface between the data logger and a RF300-series radio. Each RF95A contains dip switches that allow the user to address the modem with a number between 0 and 255.
The RF95A and the primary transceivers it supported, the RF300-series radios, were replaced on our standard price lists by the RF310-series radios and RF310M modem in June 2002.
Especificações
| Standard Operating Temperature Range | -25° to +50°C |
| Extended Operating Temperature Range | -55° to +85°C |
| Dimensions |
|
| Weight | 227 g (8 oz) |
Documentos Relacionados
Lâminas do produto
Trabalhos técnicos
Compatibilidade
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Data Loggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR10X (retired) | ||
| CR23X (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR9000 (retired) |
Communication Devices
| Product | Compatible | Note |
|---|---|---|
| HT90 UHF (retired) | ||
| HT90 VHF (retired) | ||
| P50 UHF (retired) | ||
| P50 VHF (retired) | ||
| RF100 (retired) | ||
| RF200 (retired) | ||
| RF232A (retired) | ||
| RF300 (retired) | ||
| RF301 (retired) | ||
| RF302 (retired) | ||
| RF303 (retired) | ||
| RF304 (retired) | ||
| RF500B (retired) | ||
| RF500M |
Additional Compatibility Information
Radios, Radio Modems, and Radio Base Stations
The RF95A had earlier replaced the RF95 in all applications [the RF95A retained the RF95's item number]. The RF95A is backward compatible with existing Campbell Scientific RF systems but not compatible with RF310-series radios.
If RF95A modems are used in a network containing RF500M modems or RF500B base stations then the RF95A modems must use the -TD PROM; the data loggers must also be Table Data (-TD) or PakBus (-PB) versions.
Power Source
The RF95A requires a 5 V power supply from the data logger's CS I/O port or from a PS100/A100 (non-data-logger repeater site).
Perguntas Frequentes Relacionadas
Number of FAQs related to RF95A: 3
Expandir todosRecolher todos
-
Usually, yes. Contact Campbell Scientific for a return material authorization number (RMA) and instructions for returning the unit for repair. Additional information is available on the Repair and Calibration page.
-
No. The CR1000KD is designed specifically for use on the CS I/O port of the CR800, CR1000, and CR6 dataloggers.
-
If the RF modem has a CS I/O connector, then it should be compatible with the CR10X without the use of an SC932A. Ensure that the RF modem’s firmware is compatible with the CR10X firmware.
Note: RF modems that are not sold by Campbell Scientific will only interface with a CR10X via an SC932A or an SC105.